Šifra: 9801A1NR
Access Point (AP) serije H3C 802.11ac WAVE2 je zasnovana na novoj generaciji samorazvijene Gigabit 802.11ac MIMO i 802.11ac WAVE2 MU-MIMO tehnologije. U poređenju sa postojećom 802.11ac tehnologijom, WAVE2 može da podrži istovremeni prenos podataka više korisnika uz povećanu ukupnu propusnost.
H3C pruža najširi portfolio AP WAVE2 serije, koji uključuje WA560, WA538, WA536, WA530 i WA510H. U kombinaciji sa svojim kompaktnim
Tehničke Specifikacije
Features | WA530-WW |
Weight | 0.34kg |
Dimensions (excluding mounting accessories) | 170 x 170 X35.5mm |
Speed | 867Mbps (5G) |
400Mbps (2.4G) | |
Fixed port | Two 10/100/1000Mbps Ethernet ports |
(one of two works on PoE+) | |
Network ports support link aggregation(LACP) for redundancy and increased capacity | |
One console port | |
One USB port | |
Local power supply | 54VDC |
Built-in antenna | Dual-band low-E omni-directional antenna |
Antenna gain | 2.4GHz: 3.8dBi |
5GHz: 3.1dBi | |
Maximum transmit power(Combined power, limited by local laws and regulations) | 2.4GHz: 18dBm |
5GHz: 23dBm | |
(Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations) | |
Adjustable power | 1dBm |
Power consumption | <12.95W (without USB) |
Radio Specifications: | 256 |
Max. number of STA per radio | |
Radio Specifications: | 16 |
Max. number of SSIDs per radio | |
Operating temperature/storage temperature | Operating Tem: -10 ºC ~ 55 ºC ; 0ºC~45ºC(Recommended) |
Storage Tem: -40ºC~70ºC | |
Operating humidity/storage humidity | 5% to 95% (non-condensing) |
PoE | 802.3af/802.3at compatible power supply |
Operating frequencies | 802.11ac/n/a : 5.725GHz-5.850GHz ; 5.47~5.725GHz; 5.15~5.35GHz |
802.11b/g/n : 2.4GHz-2.483GHz | |
Modulation | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps |
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps | |
MIMO-OFDM (11ac): MCS 0-9 | |
Modulation mode | 11b: DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps |
11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps | |
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM | |
11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM | |
Safety compliance | IEC 60950-1, EN 60950-1 |
EMC | EN 301489-1, EN 301489-17, EN 55032, EN 55024, EN 60601-1-2 |
Radio frequency certification | EN 300 328, EN 301 893 |
Health | EN 50385 |
Features | WA530-WW | |||||
Positioning | Indoor 802.11ac Wave2 AP | |||||
11ac Supported | Streams | 5G: 2x2 | ||||
2.4G: 2x2 | ||||||
20/40/80MHz mode | √ | |||||
MU-MIMO | √ | |||||
1733Mbps(PHY) | √(WA560-WW & WA538-WW Radio1 only) | |||||
A-MPDU | √ | |||||
A-MSDU | √ | |||||
Maximum likelihood demodulation (MLD) | √ | |||||
Maximal ratio combining (MRC) | √ | |||||
Spatial-Time block coding (STBC) | √ | |||||
Low-density parity check (LDPC) | √ | |||||
CDD/CSD | √ | |||||
DFS | √ | |||||
WLAN basics | Virtual APs | 16/radio | ||||
open system/shared key authentication | √ | |||||
Broadcast Probe acknowledge control | √ | |||||
Mixed connection for WPA, WPA2,WPA3 and Pre-RSNA users | √ | |||||
RTS/CTS | √ | |||||
CTS-to-self | √ | |||||
Concealed SSID | √ | |||||
Hotspot 2.0 | √ | |||||
WLAN extended | STA related | STA offline anomaly check, STA aging, statistics and status query | ||||
Limit user number | √ | |||||
Link integrity check | √ | |||||
Security | Encryption | WEP-64/128/152bit, dynamic WEP, TKIP, CCMP,WPA3 | ||||
Multiple encryption key triggered dynamic unicast/multicast key update | ||||||
802.11i | √ | |||||
Authentication | 802.1X, MAC address authentication, PSK authentication, Portal, PPSK | |||||
(May need to work with H3C Access Controller depending on application) | ||||||
User Isolation | Supported: | |||||
1. Layer 2 forwarding restriction | ||||||
2. Virtual AP (multiple SSIDs) isolation | ||||||
Forwarding security | Packet filtering, MAC address isolation | |||||
SSID and VLAN binding | √ | |||||
Wireless Intelligent Application Aware (wIAA) | √ | |||||
WIDS/WIPS | √ | |||||
802.11w | √ | |||||
AAA | Radius Client | √ | ||||
Multiple-domain authentication server | √ | |||||
Backup authentication server | √ | |||||
Layer 2 | IP address configuration | Static IP (available only in fat AP mode) | ||||
and layer 3 | DHCP assigned IP(option 60) | |||||
features | Native IPv6 | √ | ||||
IPv6 Portal | √ | |||||
IPv6 SAVI | √ | |||||
ACL | IPv4/IPv6 | |||||
Local forwarding | Local forwarding based on SSID+VLAN | |||||
Multicast enhancement | IGMP Snooping/MLD Snooping | |||||
QoS | 802.11e | Wi-Fi Multimedia (WMM) | ||||
Priority | Ethernet port based 802.1p identification and marking priority | |||||
Priority mapping for wired and wireless connection | ||||||
Strategic QoS mapping | Distinctive QoS strategies based on individual SSID/VLAN | |||||
Layer 2 to Layer 4 packet filtering | √ | |||||
and traffic classification | ||||||
CAR | √ | |||||
User bandwidth management | Bandwidth allocation per STA, or all STAs sharing bandwidth with a common SSID | |||||
Load balancing | User/traffic/radio (dual frequencies) based | |||||
Spectrum Guide | √ | |||||
Multicast enhancement | Multicast to Unicast (IPv4, IPv6) | |||||
CAC(Call Admission Control) | User number/bandwidth based | |||||
SVP Phone | Bandwidth allocation per STA, or all STAs sharing bandwidth with a common SSID | |||||
Green features | Per-packet power control (PPC) | √ | ||||
Green AP mode | √ | |||||
Dynamic MIMO power saving | √ | |||||
Enhanced automatic power save delivery (E-APSD) | √ | |||||
WMM Power Save | √ | |||||
Management and maintenance | Network Management | Trap, HTTP(S), SSH, Telnet, FTP/TFTP, SNMP V1/V2/V3 only applicable in Fat mode | ||||
Managed SSID | √ | |||||
Log function | SYSLOG | |||||
Remote probe analysis | √ | |||||
AP Working Mode | Fit/Fat & Anchor(not included WA510H,WA530,WA560) | |||||
Wi-Fi Certified | IEEE 802.11a/b/g/n/ac, WMM, WPA, WPA2 and WPA3 – Enterprise, Personal (SAE), Enhanced Open (OWE) |