H3C LS-5130S-28S-LI-GL L2 Ethernet Switch

Šifra: 9801A1QX
Gigabitni L2 svič, H3C S5130S-LI je viša klasa inteligentnih upravljivih svičeva za enterprise segment tržišta. Svič je namjenjen za mreže koje zahtijevaju visoke performanse, visoku propusnu moć, pouzdanost u radu uz lakoću konfigurisanja na Comware 7 operativnom sistemu.   H3C S5130S-LI serija svičeva nudi gigabitne konekcije na 24 porta i 10Gb na 4 zasebna SFP+ porta.

Tehničke Specifikacije

 

Model S5130S-28S-LI
Switching capacity 128Gbps
Packet forwarding rate 96Mpps
Dimensions (H × W × D) 43.6 × 440 × 160 mm
Weight < 2.5 kg
Console ports 1
Service ports 24-port 10/100/1000Base-T
4-port SFP+
Input voltage range 100 VAC to 240 VAC @ 50 Hz/60 Hz
Power consumption MIN AC: 10W
MAX AC: 24W
Operating temperature 0ºC to 45ºC
Operating humidity 10% RH to 90% RH, non-condensing
Stacking Intelligent Resilient Framework 2 (IRF2)
Link aggregation GE/10GE port aggregation
Static aggregation
Dynamic aggregation
M-LAG
Jumbo frame Supported
MAC address table Blackhole MAC address
MAC learning limit
Flow control 802.3x flow control and half-duplex backpressure
VLAN Port-based VLAN
QinQ
Voice VLAN
MAC VLAN
ARP ARP Detection
ARP speed limit
ND Supported
VLAN virtual port Supported
DHCP DHCP Client
DHCP Snooping
DHCP Relay
DHCP Server
DHCP Option82
DNS Static and Dynamic DNS
IPV4 and IPV6
Routing protocols IPV4/IPV6 static routing
RIP/RIPng, OSPFV1/V2/V3
Strom suppression Storm suppression based on port bandwidth percentage
Storm suppression based on PPS
Layer 2 ring network protocol STP/RSTP/MSTP
STP Root Protection
Smart Link
RRPP
Mirroring Flow mirroring
Port mirroring
QoS/ACL Packet filter
Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR
Bidirectional ACL
Port-based speed limit
Flow redirection
Time-range
Layer 2 ring network protocol STP/RSTP/MSTP
STP Root Protection
Smart Link
RRPP
Security Hierarchical user management and password protection
MAC-based authentication
802.1X
SSH2.0
Port isolation
IP source guard
HTTPs
EAD
Loading and upgrading Loading and upgrading through FTP/TFTP
Management and maintenance Configuration from CLI
Login through Telnet, and the console port
Simple Network Management Protocol (SNMP)
Remote Monitoring (RMON)
IMC network management system
WEB management
Management and maintenance System log
Alarming based on severity
IRF
NTP
Debugging information output
Telnet-based remote maintenance
NQA
DLDP
Virtual Cable Test